Large bore inflation gauge- with in-line gauge. Equipped with H4660A chuck and a 6' hose. Gauge is calibrated 10-120 psi in 2lb. Increments.

Standard/Large bore air liquid gauge Calibrated 0-160 lbs. In 5lb units & 0-1000 in kpa metric scale. 14" flexible hose, holds pressure readout until released.

Guides, aligns and holds valve through valve hole while mounting tire.

Standard/Large bore air liquid master gauge Straight on air chuck fits both standard/large bore valves. Has 12" flexible hose to get at hard to reach valves. Calibrated 1-160 psi in 1lb. Increments. Has recalibration feature.

To maximize air flow, a Z12 inflater is used to remove the core housing during inflation & deflation. This inflater operates like the IN-80A Super Large Bore inflater.

Contains core tool as well.

Metal rod provides added rigidity.

Rugged tool handles any length valve in any size rim. Screws over valve threads and quickly installs valve into hole by applying pulling pressure.

Make it easier to check the inside dual tire. Designed by a trucker to make a difficult job easier. Designed for use on metal & plastic valve caps.

Combines valve core wrench and deflating pin with flexible cable for fishing through valve hole.

Combines valve core wrench and deflating pin with flexible cable for fishing through valve hole.

A special air chuck with a straight on connection and a 180° reverse angle chuck allows access to valves located in tight and hard to reach places.