CP7492

Working torque range- 50-450 ft.lb
Max torque @ 90PSI in reverse- 625 ft.lb
Weight- 6.2Lbs

CP77362

Three power settings in forward and 1 in reverse
Max torque @ 90 PSI- Reverse 670 ft. lbs
Free speed RPM- 10020
Weight- 6.5Lbs

CP77482

Working torque range- 75-500 ft.lb
Max torque @ 90 PSI- Reverse 922 ft.lb
Free speed RPM- 8200
Weight- 4.9Lbs

CP7748TL2

2 setting positions : one in Reverse and one Torque Limited in forward
60/70 ft. lbs. - 90/100 Nm in torque limited position in forward
920 ft.lbs - 1,250Nm of maximum torque in reverse

CP77492

Full teasing trigger allows full control. Lightweight composite handle weighs less than standard metal impact wrenches. Two position power setting regulator in forward and reverse for maximum control.

CP7749

Full teasing trigger allows full control. Lightweight composite handle weighs less than standard metal impact wrenches. Three position power setting regulator in forward and full power reverse for maximum control.

CP8849K

1/2" Battery Powered Brushless Impact. 4 Settings in forward to prevent over torqueing. 850 ft.lbs of power in reverse. LED lights on front of tool. Kit comes with 2 batteries and charger. CP88492K = 2" Extended anvil.

CP772H6

Working torque range- 150-70 ft.lb
Max torque @90PSI in reverse- 1,000 ft.lb
Blows per minute- 900
Free speed RPM- 4,200
Weight- 11.6lbs

CP77636

Working torque range- 100-950 ft.lb
Max torque @90PSI in reverse- 1150 ft.lb
Blows per minute- 840
Free speed RPM- 6,300
Weight- 13.7lbs

CP7769

Working torque range- 300-1,080 ft.lb
Max torque @90PSI in reverse- 1,440 ft.lb
Blows per minute- ,1200
Free speed RPM- 6,500
Weight- 6.9lbs

CP77756

1" square drive
Working torque range- 100-1200 ft.lb
Max torque @90PSI in reverse- 1,550 ft.lb
Blows per minute- 750
Free speed RPM- 5500
Weight- 25.4 Lbs

CP77826

1" square drive
Working torque range- 440-1,850 ft.lb
Max torque @90PSI in reverse- 2,140
Free speed RPM- 5,200
Blows per minute- 500
Weight- 22.2 Lbs

CP7782SP6

1" spline drive
Working torque range- 440-1,850 ft.lb
Max torque @90PSI in reverse- 2,140
Free speed RPM- 5,200
Blows per minute- 500
Weight- 22.2 Lbs

CP77836

1" Lightweight Low Air Square Drive
Working torque range- 413-1,253 ft.lb
Max torque @90PSI in reverse- 1,770
Free speed RPM- 6,200
Blows per minute- 500
Weight- 20.9 Lbs

CP860

High Speed HD 24,000 rpm 1/4" Die Grinder. Made in Japan quality

CP873K

Low speed buffer
Chuck size/wheel size- 7/16"
Free speed RPM- 2,800
Weight- 2.25 Lbs

CP876

Die Grinder
Colet size- 1/4"
Free speed RPM- 30,000
.3HP
Length- 4.75"
Weight- .75lbs

CP7265S

Sander
Free speed RPM- 5,000. Pad diameter- 7"
.7HP, 5lbs
Min air hose- 3/8"

CP7269S

Sander
Variable Speed .71 hp. Pad diameter- 7"
Weight- 5.1 Lbs
Average air consumption- 26.7 CFM with 1/4"NPTF and min 3/8" hose.

CP854

Angle Grinder
Free speed RPM- 12,000. Wheel size- 4"
Length- 9". Weight-3.75lbs
Min air hose- 3/8"

CP869S

Sander
Free speed RPM- 5,000
Pad diameter- 7"
Weight- 6.5 Lbs
Average air consumption- 13.25 CFM with 1/4"NPTF and min 3/8" hose.

CP9121BRCR

Angle Grinder
12,00 RPM - 5" .8 HP , 4.62 lb. BR = 5/8-11 spindle thread. CR = 3/8-24 spindle thread.

CP710

Length- 5.25"
Weight- 1lb
Min air hose- 1/4"